This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

Syftet med detta arbete är att undersöka ergonomins och hälsans förutsättningar på en processindustri i Sverige samt att ta fram förslag på förbättringar och ett träningsprogram för personalen på industrin. För att minska risken för belastningsskador är det viktigt att individen arbetar med ergonomiska arbetsställningar. Om arbetsgivaren förser arbetstagaren med så goda förutsättningar som möjligt att tillämpa ergonomiska arbetsställningar samt erbjuda friskvård kan kostnaderna för sjukfrånvaro sänkas betydligt. Metoder som använts är kortare observationer följt av de ergonomiska uträkningarna OWAS och RULA. En interventionsgrupp inom produktionen fick besvara en enkät, som även fylldes i av en kontrollgrupp som bestod av administrationspersonal (kontorspersonal).

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

ABSTRACT Behavioural problems are a compound conception for emotional difficulties at different levels. Individuals with behavioural problems could have difficulties with social relations, low self-esteem, anxiety and worry. The purpose with the examination was to describe how clients apprehend their behavioural problems and what they consider could be the causes of it. The examination was based on the qualitative interviews with 5 clients and a professional helper. We came in contact with our clients through our practice.

The purpose of this study was to examine and evaluate an assembly station at Kalmar Industries in respect to ergonomics. The study was to result in an improved assembly station with lower risk of work- related injuries. It was the study group?s expectation that the measures taken at the assembly station can function as guidance and an inspiration for other ergonomic improvements at the company. Several goals related to the purpose were established as guidance for the study.The mechanic?s work situation was mapped through a series of methods.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.

I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

Some children develop externalizing and internalizing behavior problems at an early age. Previous research has often treated these children as a homogeneous group, the purpose of this study is to show that this group of children is in fact heterogeneous. Data from theSOFIAstudy was used and preschool pedagogues were informants. The sample contained 2121 boys and girls between 3-5 years. Groups of children with the behavior problems and the risk factors AD/HD symptoms, fearlessness and callous-unemotional traits were created.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The purpose of this study was to examine interpersonal problems and its relationship to the working alliance in psychotherapy. To examine this, data was used from Umeå and Lund University psychology practice client database, which clients responded to by using the self-assessment scales Inventory of Interpersonal Problems Circumplex Scales and the Working Alliance Inventory. The sample consisted of 201 participants that answered the questionnaires both before and after psychotherapy. A second sample consisted of 93 clients who specifically sought help for interpersonal problems. Results showed that the level of interpersonal problems before and after psychotherapy changes.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.